Have you ever used Windows Backup to backup to an external hard drive and received the error code 0x8078012D? If so, relax knowing that you’re not the only one who is now dealing with this problem. According to error 0x8007045D, the input-output device may be the primary cause of this issue.
When attempting to use the Windows Copy Utility to generate a backup of the Windows Installation, Windows users have reported obtaining an error number of 0x8078012D. According to reports, Windows 7, Windows 8, and Windows 10 are all affected by this problem.
Reason behind the Windows Backup 0x8078012D Error Code
This error typically occurs for any of the reasons listed below:
- Turn off the Windows Backup Service.
- Storage Sectors With Errors
- File System Corruption
- Conflicting third-party software
Let’s look at the solutions that other afflicted people have taken to repair the problem now that we are aware of the error’s potential sources.
How to Fix Windows Backup 0x8078012D Error?
Have you ever used Windows Backup on an external hard drive and received the error code 0x8078012D? If so, you need not be concerned because you are not the only one who has this issue.
The input-output device can be the primary culprit of this problem. Try to fix the issue listed below if you are unable to utilise the previously produced system backup on your PC or it is resulting in error code 0x8078012D. We advise you to update Windows before continuing.
Restart your PC in Safe Mode
If the following adjustments did not resolve the issue, there could be a particular programme that is to blame. To troubleshoot this, select Clean Boot PC in Windows 10 to start your computer in clean boot mode and identify whether a particular programme is to blame.
If the following solution does not resolve the issue, you should look into if the issue is connected to the HDD/SSD storage. A CHKDSK (Check Disk) scan enables the detection of faulty logical sectors and their replacement.
To access the WinX menu, use the Windows key + X.
To start PowerShell with administrator rights, select Windows PowerShell (Admin) from the menu. If a UAC prompt appears, select Yes to proceed.
Enter the settings you wish to use for the scan after typing chkdsk X: in the PowerShell window, where X is the drive letter for the partition of your system hard disc that you want to check.
Running a scan without the specified parameters will simply scan the currently chosen drive and will not correct any issues.
Use the command on CMD:
chkdsk C: /f
Or
chkdsk D: /f /xYou can use the following parameters:
/f - Tells CHKDSK to fix any and all errors that it finds
/r - Tells CHKDSK to locate bad sectors on the drive and try to recover any and all readable information from them
/x - Tells CHKDSK to forcefully dismount the selected drive before scanning itWatch for the CHKDSK utility to complete its task. You may keep track of the utility’s advancement at the time of the scan.
While Windows is running on a disc, the CHKDSK tool cannot scan that partition. In this situation, you will be prompted to decide whether you want the programme to run the scan the next time your machine wakes up.
Create a Windows Backup
To see the Run dialogue, press the Windows key and R. Enter services.msc in the Run box to access the Services interface. If User Account Control (UAC) asks you to authorise access, select Yes.
Search the list of services under Services on the right side until you locate an entry for Windows Backup.
To access the context menu, right-click Windows Backup and choose Properties.
Change the Startup type to Automatic in the Properties screen’s General tab, then click Start to restart the service if it has been halted.
Use the modifications. To see if the 0x8078012D problem code is fixed, restart the computer and carry out the same operation that caused it.
Remove any Third Party Software
It’s conceivable that a false positive is influencing the backup and causing the error if you’re using a third-party security suite or firewall. By turning off the security suite before launching Windows Backup, you may probably prevent the error code when generating a backup.
To disable real-time protection, right-click on the antivirus software’s tray icon and seek for the option.
If deactivating did not resolve the problem, go to the Programs and Features menu and remove the third-party security programme.
This approach shouldn’t be used if Windows Defender is installed because there is no proof that it interferes with the backup service.
Create New Backup in Clean Boot
Open “System Configuration” by selecting it in the Start Menu.
Click the Normal Startup option under the “General” menu.
Select Hide all Microsoft Services under the “Services” pane, then click Disable all.
Select “Apply” > “OK.”
Use the Windows Backup and Restore programme to now generate a backup.
Turn on Windows Backup Service
If the Windows Backup Service is turned off under the Windows Services, this issue could also arise. We advise you to open the Services app and verify if it is switched on or off in order to resolve this problem. If you discover it turned off, follow the instructions below to activate it.
- Type Services into the Start search box and hit Enter.
- Scroll down to the Windows Backup service in the Services app.
- It may be double-clicked to see the Properties window.
- Set Manual Startup to the General tab.
- Verify that the service is active under Service status. The Start button should be clicked if it is Stopped.
- Click Apply > OK to keep the changes in place.
Try SFC and DISM scans
The two built-in utility System File Checker (SFC) and Deployment Image Servicing and Management (DISM) are capable of resolving the majority of corruption problems that might result in the 0x8078012D error using Windows Backup.
While DISM employs a feature of Windows Update to replace corrupted instances of windows files downloaded from the internet, SFC is a local programme that doesn’t need an active internet connection since it uses the locally stored cache to replace corrupted system files.
Open Command Prompt in Administration Mode.
Type sfc /scannow
The next 10-15 minutes will pass as this utility searches for and corrects damaged or missing files and directories.
After this is finished, make careful to inspect the system image for any file corruption. Run the code listed below on the active PowerShell or Command Prompt to do this.
DISM /Online /Cleanup-Image /RestoreHealth
It will also take DISM 10 to 15 minutes to locate and fix any issues with the system image. Wait patiently, and once it’s finished, see whether you can now generate a fresh backup without encountering the 0x8078012D issue or any other problems.
Delete Shark007 Codec
A few users claimed that removing the Shark007 codec from their PCs resolved this problem. This codec has a history of interfering with system backups and returning various error codes, notably 0x8078012D. Whether you do use this tool, stop using it and see if the issue is solved.
Start by opening Control Panel.
Locate “View by” and choose Large icons from the drop-down menu.
By doing this, the Control panel’s programmes will all be visible.
Look for the Shark007 tool in Programs and Features.
If it’s there, right-click it and choose “uninstall.”
Press Uninstall one again if a confirmation box has appeared.
After the software has been properly removed, restart your computer. Now see if your machine still supports the backup you previously generated.
Check User Profile
Even after deleting the prior backup, try creating a new account and going through the backup procedure again if you are unable to save the freshly produced backup:
Delete Shark007 Codec
A few users claimed that removing the Shark007 codec from their PCs resolved this problem. This codec has a history of interfering with system backups and returning various error codes, notably 0x8078012D. Whether you do use this tool, stop using it and see if the issue is solved.
Start by opening Control Panel.
Locate “View by” and choose Large icons from the drop-down menu.
By doing this, the Control panel’s programmes will all be visible.
Look for the Shark007 tool in Programs and Features.
If it’s there, right-click it and choose “uninstall.”
Press Uninstall one again if a confirmation box has appeared.
After the software has been properly removed, restart your computer. Now see if your machine still supports the backup you previously generated.
Check User Profile
Even after deleting the prior backup, try creating a new account and going through the backup procedure again if you are unable to save the freshly produced backup:
Visit: Microsoft Safety Scanner Download
Click on the download button.
Install Safety Scanner by according to the installation guidelines.
Start the Microsoft Safety Scanner programme.
Choose Scan Type.
Tap Full Scan.
Choose Next.
The infected files will be removed if any virus/corrupted or missing file is found.
What to do next?
You must create a fresh system backup on your computer once you successfully fix the backup problem on your Windows 11 or Windows 10 computer. Any backup error code that appears on your computer in the near future will be eliminated thanks to this.
Summary
We really hope you find our guide on fixing Windows Backup Error 0x8078012D to be helpful. On their Windows PC, many customers encounter a backup issue, which is indicated by the error number 0x8078012D.
When a user attempts to generate a backup for Windows updates, a typical problem known as Windows system image backup occurs. Please tell your friends about this post if you enjoyed it.
0 Comments